How to detect one of two bit patterns (e.g. 10010 and 10111) in a random sequence of bits.
Design Senior Interview Questions
1,470 design senior interview questions shared by candidates
Overall ok . Didn't any one question to be very difficult
They asked about a common source amplifier with degeneration, what is the gain with and without the degeneration resistor. For the second part of the same question the drain and the gate were tied together.
Setup and Hold time constrain
Show me an example design system work you've done
I was asked to show some of my current tasks/projects and explain what challenges I faced, what the goal to achieve was etc.
opamp with resistors forming an inverting amplifier, gain -2. Non inv input at gnd = 0V There is additional resistor (R3) from inverting input to gnd. what is the voltage gain
How might all the different bit fields of the virtual address be used in the process of the CPU converting from virtual to physical addresses?
About trace driven vs execution driven modeling. Trace driven modeling is faster; and but is less realistic due to not exploring bad paths during branch prediction. Execution driven modeling usually requires the existence of a functional model - in addition to a timing model to do neat things like sampling etc.
Draw a inverter in logic form and in CMOS configuration. And explain the physics behind it.
Viewing 321 - 330 interview questions
See Interview Questions for Similar Jobs
Concepteur Ux UiConception NumériqueConception InteractiveConcepteur Ux SeniorVisualizationConcepteur D'interfaceConcepteur GraphiqueConcepteur FlashTechnical DesignerConcepteur Ui SeniorConcepteur D'interaction SéniorDesigner D'interactionConcepteur D'interface UtilisateurDesigner D'interface WebOpérations De ConceptionDesign InteractifConception Graphique WebDesign Web