Name a time when you spoke up about safety concerns during work. How did you go about informing the team about your concerns? Would you have done anything different in hindsight?
Electronics Sales Interview Questions
2,699 electronics sales interview questions shared by candidates
I didn't expect to be asked straight-forward if I would be willing to commit long term (at least 5 yrs)
1) Showed me a waveform and asked me what kind of radar emitted this kind of waveform. 2) Showed me a Darlington pair and asked me what kind of characteristics this circuit had. 3) Asked me how long it would take a battery (with a stated capacity) to drain when connected to a resistor of given resistance and two LEDs (of known voltage drop and current draw). A total of 12 questions.
Share a time when you had to deal with difficult users while explaining system functionality.
What was my previous job like?
about hardware and electronics .
Experience
Why are you interested in this role?
microcontroller 8051 architecture??
they asked subject of intrest since mine was process instruments and process control so questions are like 1 -> types of temperature sensors their types range and compensations (thermocouple , rtd ,pyrometer,thermistor) 2->level sensors that u have seen in your industrial training, and for a particular size of tank which is better. (displacer, radar, ultrasonic etc) 3->types of flowmeter , and how dptx can be used for flow measurement whether it is linear or not 4-> types of flipflop and some related information regarding these why it is called flipflop 5-> difference between microcontroller and processor ,to draw pin diagram of these 6->why only 4- 20 ma signal 7->software on which i have done plc and scada , information regarding OB , FB, FC,DB and to write ladder logic for a given situation 8-> information regarding controller (pid) tunning ,which type is used when and their ploblem and solution and for a given condition which controller should be used etc
Viewing 1221 - 1230 interview questions